login   |    register
Eduard [ MORE REVIEWS ] [ WEBSITE ] [ NEW STORIES ]

In-Box Review
135
IDF Merkava Mk IV basket 36166
  • move

by: Darren Baker [ CMOT ]


_ORGINPUB:
Armorama

introduction

In July 2011 Eduard released three photo etch upgrade sets for the HobbyBoss Israeli Defence Force Merkava Mk IV, in this review I will take a look at set 36166. This set concentrates on the basket for the rear of the turret and the rear of the hull. The other 2 sets offered are 36173 which deals with the armoured skirt (Reviewed here), and 36172 which improves detail over the whole vehicle (Reviewed here).

Contents

The photo etch set is packaged in typical Eduard style, that being a reseal able plastic sleeve with a card stiffener in the packaging to help prevent damage to the set. This set is made up of one photo etch fret and two pages of instructions.

Review

The photo etch fret in this set is 0.14mm thick which will make any bends that need to be made easy. The thickness of the photo etch will mean that care will need to be taken as damaging the photo etch components will be difficult to repair or hide. Down both sides of the photo etch frets are a series of hexagonal holes which are used to make bolt heads for adding detail to your model, covered in the instructions is a method on how to use these holes to get your bolt heads.

The instructions guide you through the use of this set using black and white line drawings which are laid out in an easy to follow way. It is worth remembering that Eduard has all of their instructions available to you on their site (Eduard website link) in PDF format which can be viewed there or downloaded, I personally prefer their PDF instructions as they are in colour with the various colours further helping to identify what is photo etch or a model part and what parts need to be removed.

Page 1 of the instructions concentrates on the bins at the rear of the hull and their various covers. All of the steps here should be easily accomplished with the only negative being that the shutters used here are one piece and not articulated.
Page 2 of the instructions covers the turret basket which, while not being the finest hole detail I have seen, it is the most accurate representation I have seen, as the frame work which is under the wire mesh is sited on areas where there are no holes and this is replicated. Should you wish to make canvas coverings for these baskets Eduard has thoughtfully provided the tie downs for the canvases.

Conclusion

While not the most exciting photo etch set I have seen it does appear to be one of the most accurate in terms of detail. The set is produced and sold for the HobbyBoss Merkava Mk IV, but I see no reason why it could not be used with the Academy offering although you will need to buy some square plastic stock to create the framework under the turret basket. I would suggest to Eduard that they add the appropriate plastic stock for that purpose to this set and release it for the Academy offering.
SUMMARY
Highs: A very accurate turret basket make this set worthy of anyone’s consideration for their Merkava Mk IV model.
Lows: There are no obvious lows with this set.
Verdict: I highly recommend this product to you.
  Scale: 1:35
  Mfg. ID: 36166
  Suggested Retail: $22.95
  Related Link: 
  PUBLISHED: Aug 04, 2011
  NATIONALITY: Israel
NETWORK-WIDE AVERAGE RATINGS
  THIS REVIEWER: 87.04%
  MAKER/PUBLISHER: 88.44%

Our Thanks to Eduard!
This item was provided by them for the purpose of having it reviewed on this KitMaker Network site. If you would like your kit, book, or product reviewed, please contact us.

View Vendor Homepage  |  More Reviews  

About Darren Baker (CMOT)
FROM: ENGLAND - SOUTH WEST, UNITED KINGDOM

I have been building model kits since the early 70’s starting with Airfix kits of mostly aircraft, then progressing to the point I am at now building predominantly armour kits from all countries and time periods. Living in the middle of Salisbury plain since the 70’s, I have had lots of opportunitie...

Copyright ©2019 text by Darren Baker [ CMOT ]. Images also by copyright holder unless otherwise noted. Opinions expressed are those of the author(s) and not necessarily those of Historicus Forma or Silver Star Enterprises. All rights reserved.



Comments

Nice review Darren. I'll wait and see whether they plan to release it with some plastic stock for the Academy version, which I have. Even if they don't I think this would be quite useful for the Academy model.
AUG 04, 2011 - 12:34 AM
Thank you Karl. I really think Eduard would do well from adding the square stock for the academy release, as I can see no reason for it not to fit. The other option is to include in the instructions the correct square stock sizes and angle cutting instructions.
AUG 04, 2011 - 04:30 AM
Might be a bridge too far for most of the brass companies to start including resin and/or plastic parts too. There was somebody else commenting on that here the other day.
AUG 04, 2011 - 05:19 AM
I cannot see square stock plastic and a set of cutting instructions causing Eduard any problems. I should add to this that some sets I have got from ABER which included plastic or metal rod has caused some difficult to correct damage to the photo etch unless both elements are secured inside the packaging.
AUG 04, 2011 - 06:49 AM
Never thought of the damage that could be caused if it isn't packed properly- in fact I had the same thing happen with the Verlinden .50cal set- some of the resin bits got crushed against the etch and ruined a few small bits. I guess it serves as a reminder to always have some brass rod and evergreen handy!
AUG 04, 2011 - 08:50 AM
   

What's Your Opinion?


PHOTOS
Click image to enlarge
  • move
  • move
  • move
  • move